Timer And Sleep Operation; Setting The Timer - Sharp SD-AT100H Bedienungsanleitung

Timer and sleep operation

The unit turns on and plays the desired source (DVD, video CD, CD, tuner) at the pre-
set time.
[Back]

„ Setting the timer

Before setting timer:
1 Set the unit on time (page 24).
If it is not on time, you cannot use the timer function.
2 Prepare for playback and set the TV to the desired channel.
1
Turn the power on and press the TIMER but-
ton.
Set the unit on time if "TIMER STANDBY" does not ap-
pear.
2
Within 10 seconds, press the or
select "TIMER SET", and press the ENT but-
ton.
3
Press the or button to adjust the hour and
then press the ENT button.
4
Press the or button to adjust the minutes and then press the
ENT button.
The start time is set and the finish time (1 hour later) will be displayed automati-
cally.
5
Set the time to finish as in steps 3 and 4 above.
6
Switch input with the or button,
and then press the ENT button.
When you select the tuner, select a station
or
by pressing the button, and then
press the ENT button.
7
Adjust the volume with the or button and press the ENT button.
Settings are displayed in order and the unit
will enter the timer stand-by mode.
01/11/16 SD-AT100H(H)E6.fm
SD-AT100H
ENGLISH
button to
DVD/CD TUNER AV1
AV3-A
AV3-D AV2
E-58