Settings That Require Individual Configuration - Sony IPELA NSR-1000-Serie Installationsanleitung

User Name
Enter the user name for connecting to the device. It
can be up to 32 characters and consist of
alphanumeric characters and some symbols
(periods (.), hyphens (-), underscores (_)).
Password
Enter the password for connecting to the device. It
can be up to 32 characters and consist of
alphanumeric characters and some symbols
(periods (.), hyphens (-), underscores (_)).
When registering a camera server (SNT series,
etc.):
The following dialog box appears.
Select the channel to use, and click [OK].
Notes
• A check is performed to determine whether the
maximum number of registered cameras has been
exceeded during processing. If the maximum number
has been exceeded, a warning message appears to
notify you and processing stops.
• If registration for a camera fails, start your Web
browser and connect directly to the camera to confirm
that images from the camera are displayed. In
addition, use the IP address you entered in the Web
browser for the camera's IP address.
The device is registered to NSR, and is added to the list.
Caution
If you specify an IP address and port number that
duplicates that of an already registered device, a warning
appears and the device cannot be registered.
Proceed to "Configuring automatic record settings"
(page 31).
Configuring automatic record settings
Automatically start recording for all cameras.
Select [Automatic Record Settings], and click [Next].
↓
The Main screen appears in a 2×2 layout, and recording
starts automatically for all cameras.
Notes
• The recording settings are automatically configured
based on the number of cameras and storage capacity.
• If you want to change the recording settings, click
(Configuration) at the top right of the Main screen,
and select [Easy Setup] in the Recorder Settings
screen that appears.
Settings that Require Individual
Configuration
Further configuration is required in the following cases.
Storage location settings
Under basic configuration settings, data is stored on the
first partition of the unit's internal hard disk.
For details on recording data to an optional NSRE-S200
unit or to other partitions, refer to the User's Guide
(PDF).
31
Step 3: Settings