Sony IPELA NSR-1000-Serie Installationsanleitung Seite 27

2 Click [Execute].
3 Click [Next].
Proceed to "5 Add User".
5
Register users, and configure logon passwords and
permission settings for various functions.
If you do not want to register users, select [Skip
configuration] and click [Next], and proceed to
step 6.
1 Select [Configure], and click [Next].
The User Management screen appears.
2 Click [Add].
The Add User screen appears.
3 Configure each setting, and click [OK].
User Name
Enter the user name that will be used to log onto
the NSR. The name can be up to 32 characters
long and consist of alphanumeric characters,
hyphens (-), and underscores (_).
User names are case sensitive.
Password
Enter the password that will be used to log onto
the NSR. The password can be up to 32
characters long and consist of alphanumeric
characters, hyphens (-), and underscores (_).
Passwords are case sensitive.
Confirm Password
Reenter the same password for confirmation.
User Level
Select the permission level to grant the user.
You can only select user level 3 or 4 here.
For details on user levels and permissions, refer
to the User's Guide (PDF).
The user is added to the list in the User
Management screen.
4 Click [Close].
Proceed to "6 Open Ports for External
Network".
6
Configure settings for opening the port to external
networks.
These settings are required to access the NSR from
an external network.
27
Step 3: Settings