Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
6.4
Changing the basic settings for temperature and time
6.4.1
Changing the basic settings of temperature
With this function, you can change the factory‐set temperatures.
These settings remain stored even after the appliance has been switched on and off at the customer's
electrical main switch.
D The appliance must be switched off.
D Three dots glow on the display.
3 sec.
. Press the "P"
. Within 3 seconds, press the key "1, 2, 3 or 4" the setting of which is to be changed.
-
D The temperature display flashes.
D The stored temperature is shown on the display.
. Within 3 seconds, press and hold down the "up"
3 sec.
D First, the values are reduced or increased slowly, then rapidly. By pressing the key, the setting is re
duced or increased by one step respectively.
. Within 3 seconds, press the "P"
3 sec.
D The set temperature has been stored.
D Three dots glow on the display.
6.4.2
Changing the basic settings of the short‐time clocks (time control option)
With this function, you can change the factory‐set times.
These settings remain stored even after the appliance has been switched on and off at the customer's
electrical main switch.
D The appliance must be switched off.
D Three dots glow on the display.
3 sec.
. Press the "START/STOP" key
. Within 3 seconds, press the key "1, 2, 3 or 4" the setting of which is to be changed.
-
D The time display flashes.
D The stored time is shown on the display.
. Within 3 seconds, press and hold down the "up"
3 sec.
D First, the values are reduced or increased slowly, then rapidly. By pressing the key, the setting is re
duced or increased by one step respectively.
. Within 3 seconds, press the "START/STOP" key
3 sec.
D The set time has been stored.
D Three dots glow on the display.
52
Operating mode „Time and temperature"
key.
key.
.
or "down"
key.
or "down"
key.
.
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
