Accessories - struers Axitom Gebrauchsanweisung

48
Axitom
Instruction Manual

2. Accessories

Specification
Replacement Stainless Steel Bands
For Cutting Table with 12 mm T-slots. Available in two sizes,
each supplied in sets of two:
60 x 220 mm
60 x 493 mm
T-slot cleaner 10 & 12mm T-slots
Quick-clamping Device for 12 mm T-slots, Left
For securing the workpiece. Complete with back stop. To be
mounted on a cutting table and placed to the left of the cut-
off wheel.
Quick-clamping Device for 12 mm T-slots, Right
For securing the workpiece. Complete with back stop. To be
mounted on a cutting table and placed to the right of the cut-
off wheel.
Prism Type Jaw Block
For clamping of cylindrical workpieces with quick clamping
device TWELE or TWERI
Rubber Coated Jaw Block
For clamping of fragile workpieces with quick clamping
device TWELE or TWERI
Grooved Jaw Block
For clamping of irregular workpieces with quick clamping
device TWELE or TWERI
Clamping Tools for 12 mm T-slots
For clamping irregularly shaped workpieces. Complete with
clamps, supports and bolts.
Vertical Clamping System for 12 mm T-slots
For clamping irregularly shaped workpieces. Complete with
operating key and one flat clamping shoe.
Chain Spanner for 12 mm T-slots
For clamping cylindrical or irregularly shaped workpieces.
Complete with anchor block and operating key.
Swivel Shoes for Vertical Clamping System
For clamping irregularly shaped workpieces. Set of four
multi-shaped swivel shoes.
Riser Block for 12 mm Vertical Clamping System
For elevating Vertical Clamping System when clamping high
workpieces
Arm Extension for 12 mm Vertical Clamping System
For extending arm of Vertical Clamping System
Code
AXIBS
AXIBL
TSLOT
TWELE
TWERI
PRITW
RUBTW
GROTW
MAGOF
EXOVS
EXOCS
TREVI
EXOKS
EXOAR