Sending Faxes; To Adjust The Resolution For The Current Fax Job; To Send A Fax To One Recipient; To Send A Fax To Multiple Recipients - HP LaserJet 3015 Faxhandbuch

Sending faxes

To adjust the resolution for the current fax job

1. Press
2. Use the
3. Press
This procedure changes the fax resolution for the current fax job. For instructions about
Note
changing the default fax resolution, see
To change the fax contrast or glass-scan size (HP LaserJet 3030 all-in-one or HP LaserJet
Note
3380 all-in-one only), you must change the default settings. See
contrast setting

To send a fax to one recipient

1. Dial the fax number by using one of the following methods:
When dialing by using the alphanumeric buttons, include any pauses or additional numbers
Note
that are necessary for the call, such as an area code, an access code for numbers that are
outside of a PBX system (usually a 9), or a long-distance prefix. See
characters
2. Load the document into the automatic document feeder (ADF) input tray or onto the
3. Press
When the last page of the fax has exited the device, you can start sending another fax,
copying, or scanning.
To fax to numbers you use regularly, you can assign a one-touch key or speed-dial entry.
See
If you have electronic phone books available, you might be able to use them to select
recipients. Electronic phone books are generated by using third-party software programs.

To send a fax to multiple recipients

You can send a fax to several fax numbers at once. If you want to send a fax to a group of
fax numbers that you have assigned to a group-dial entry, see
group-dial
not been assigned a group-dial entry, see
26 Chapter 2 Faxing (basic)
to show the current resolution setting.
RESOLUTION
< or the > button to select the appropriate resolution setting.
/ to save the selection.
MENU ENTER
or Changing the default glass-size
Use the alphanumeric buttons on the device control panel to dial the number.
If the fax number you are calling has been assigned to a one-touch key, press that key.
If the fax number you are calling has a speed-dial entry, press
alphanumeric buttons to enter the speed-dial entry, and then press
for more information.
flatbed scanner (HP LaserJet 3030 all-in-one or HP LaserJet 3380 all-in-one only).
If you are scanning from the flatbed scanner (HP LaserJet 3030 all-in-one or HP
LaserJet 3380 all-in-one only), select YES when Send from glass? 1=Yes 2=No
appears, and then press
/ .
FAX SEND
To program speed-dial entries and one-touch keys
entry. If you want to send a fax to a group of numbers (maximum of 20) that have
Changing the default resolution
setting.
/ .
MENU ENTER
To send a fax to a group manually (ad hoc
setting.
Changing the default
, use the
PHONE BOOK
/
MENU ENTER
Using dialing
and To program group-dial
To send a fax by using a
.
entries.
faxing).
ENWW