Lenze Drive PLC Montageanleitung Seite 31

Show/Hide Bookmarks
Terminal strips on the bottom of the instrument
Analog Analog
inputs i t
Analog
outputs outputs
system bus system bus
(CAN) (CAN)
Tip!
l
l
X5 GND LOW HI
Abb. 1-19
120
Terminal Use
X4/AI1 Freely assignable input 1
X4/AI2 Freely assignable input 2
X4/AI3 Freely assignable input 3
X4/AOV Voltage output
X4/AOI Current output
X4/A⊥ Ground for analog inputs
and outputs
X5/GND CAN-GND
X5/LOW CAN-LOW
X5/HI CAN-HIGH
A detailed description of how to invert the digital input and output levels can be found
in the section "DIGITAL_IO" of the Manual for the Drive PLC Developer Studio (DDS).
Use the function block L_AIN or L_AOUT to adjust the analog input and output signals.
A description of this can also be found in the section "Standard Library 9300 Servo
PLC" of the DDS Manual.
Control connections
X4
CAN-CG
CAN-LO
CAN-HI
PES
level
-10 V ... + 10 V 10 V ... + 10 V
-10 V ... + 10 V / max.
2 mA
-20 mA ... + 20 mA
-
Reference potential
System bus LOW
(data cable)
System bus HIGH
(data cable)
MA DrivePLC DE/EN/FR 1.0
AI1 AI2 AI3 A AOV AOI
Data
Resolution: 10 bit + sign Resolution: 10 bit + sign
Resolution: 10 bit + sign Resolution: 10 bit + sign
-
-
-
-
3
plc003
9