BURG WÄCHTER SET 5021 Montage- Und Bedienungsanleitung Seite 30

Setting the power saving mode
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 1 or 2 keys until reaching the Administrator
menu Confirm with
– Now scroll using the 1 or 2 keys until reaching the Admin. TSE Setup menu
– Confirm with
– Scroll using the button 1 or 2 as long as you reach the menu
„TSE Setup power saving mode"
– Confirm with
– Enter the administrator code for the unit you want to change
– Using the button 1 or 2 you can activate or deactivate the power
saving mode
– Confirm with
– "Data has been saved" is displayed
Submenu FS reset
(Function only active with TSE Fingerprint units)
All stored fingerprints are deleted, however, the corresponding users are
retained. Please select this menu and follow the instructions on the display in
case of repeated errors related to the use of fingerprints.
Menu E-KEY synchronisation
In this menu, the channel of the E-KEY can be adapted to the channel of the
input unit. This function is necessary when the radio channel of the cylinder
is modified, although E­KEYs with the old channel setup are still in use.
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 1 or 2 keys until reaching the KEY synchronization menu
– Confirm with
– Enter the administrator code of unit that needs to be synchronised
– "Data has been saved" is displayed after a successful registration
Attention: Make sure that no other powered TSE unit is placed within a
direct reach of the device when registering a new keypad of a new cylinder,
as such unit could mistakenly be addressed instead of the intended one.
When in doubt, disconnect these units from power.
Info menu
The version and serial number of the system are displayed using this
function. For security reasons, the complete serial number is indicated only in
the administrator mode.
– Activate the keypad using the
– Then press FUNC, the "Code Change" menu is displayed
– Scroll using the 2 key until reaching the Info menu
– Confirm with
– Serial numbers of the keypad (EA) and of the cylinder (AA) are displayed.
Remark: For security reasons, the serial number (AA) of the cylinder is not
completely displayed before the entry of a valid administrator code.
32 | English
key
key
key
TSE PRIME
T
Th
E-K
TS
its
co
F
Do
– P
– A
p
– P
2
In
on
Th
In
so
co
Pro
Th
– R
– S
c
– S
P
W
on
by
bu
tim
Re
In
the
in
a d
an
cyl