e) Miscellaneous
• Operation of the Reflex charging station "RLG7008" takes place through only five buttons on which
the accumulator and charging data can be entered or queried.
• Status LEDs provide, just as the rear-illuminated LC display, at any time, a general view of the
accumulator and device status.
• The device can handle individual cells and also series switching from up to 16 cells (so-called
accumulator packs).
• The charging current can be set at 100 stages of between 80mA and 8A. Through this, both small
accumulators with low capacities (e.g. for slow flyer models) and, for example, large 3000mAh
power packs for RC vehicles can be charged.
• The overcharging of accumulators is avoided through several final charging criteria including a
safety timer and through automatic reduction of the charging devices at a high internal resistance.
Even accumulators which are no longer quite faultless can be charged without problems in many
cases.
33