SUSPENSION FORK
6. Check the O-ring position to see if the SAG setting is appropriate. Correct the air pressure if ne-
cessary and then repeat procedure 1. - 6.
• Decrease the air pressure to increase the SAG.
• Increase the air pressure to decrease the SAG.
LOCKOUT/REMOTE LOCKOUT
The lockout function completely blocks the deflection of the fork.
This helps specifically if you ride a mountain bike on asphalted,
well-paved paths or uphill.
SWITCHING THE SUSPENSION ON/OFF
Turn the lever
on the right fork side towards LOCK blocks the
77
spring travel. Reactivate the spring function by turning the lever
towards OPEN.
REMOTE LOCKOUT
The button
on the right-hand side of the handlebar blocks
78
the spring travel and pressing the button
spring function.
REBOUND
The rebound setting influences the speed at which the fork rebounds. If the rebound is too fast, the
bike will jump uncontrollably; but if the fork rebound is too slow, not all of the spring travel will be
available when the suspension is compressed.
1. The rebound of the fork is adjusted by turning the adjusting screw below the right fork leg.
EN
24
will reactivate the
79
77
78
79