Wiring - Lenze E82ZAFAC010 Montageanleitung

4 Electrical installation

Wiring

Wiring
Terminal data
Plug connector with spring connection
Possible connections
Bare end
Use of plug connectors
(
Stop!
Observe the following to prevent any damage to plug connectors and
contacts:
Only plug in/unplug if the controller is disconnected from the mains!
ƒ
First wire the plug connectors, then connect them!
ƒ
Also connect unassigned plug connectors.
ƒ
Use of plug connector with spring connection
32
rigid: 1.5 mm
flexible:
without wire end ferrule
1.5 mm
with wire end ferrule, without plastic sleeve
1.5 mm
with wire end ferrule, with plastic sleeve
0.5 mm
9 mm
l
2
(AWG 16)
2
(AWG 16)
2
(AWG 16)
2
(AWG 20)
EDK82ZAFAC−010 DE/EN/FR 5.0
E82ZAFX013