WIKA F2802 Betriebsanleitung Seite 17

8. Dismounting, return and disposal
8. Dismounting, return and disposal
8.1 Dismounting
Release the load from the tension/compression force transducer and disconnect from
power. Remove the tension/compression force transducer from the mounting.
8.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
When returning the instrument, use the original packaging or a suitable transport
packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
WIKA operating instructions, models F2802, F2808
EN
17