Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12
SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
12.1
Intended use of the machine
The machine is designed exclusively for the following activities:
For cutting wood or wood-based materials with similar physical properties and within the
technical limits.
ZIPPER MASCHINEN GmbH assumes no responsibility or warranty for any other use
or use beyond this and for any resulting damage to property or injury.
12.1.1
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
Temperature (operation)
Temperature (storage)
12.1.2
Prohibited applications / Dangerous misuse
Operating the machine without adequate physical and mental fitness.
•
Operating the machine without knowledge of the manual.
•
Modifying the machine design.
•
Operating the machine in a potentially explosive environment.
•
Operating the machine in closed rooms without chip and dust extraction (a normal
•
household vacuum cleaner is not suitable as an extraction device).
•
Operating the machine outside the technical limits specified in these operating
instructions.
Removing the safety markings attached to the machine.
•
Modifying, bypassing or deactivating the machine's safety devices.
•
Operating the machine with materials that are not expressly specified in these operating
•
instructions.
•
Machining workpieces with dimensions outside the limits specified in these operating
instructions.
Using tools that do not comply with the safety requirements of the standard for machine
•
tools for woodworking (EN847-1).
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against ZIPPER MASCHINEN GmbH.
12.2
User requirements
The machine is designed to be operated by one person. The prerequisites for operating the
machine are physical and mental fitness as well as knowledge and understanding of the operating
instructions. Persons who, due to their physical, sensory or mental capabilities, inexperience or lack
of knowledge, are unable to operate the machine safely must not use the machine without
supervision or instruction by a responsible person.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
N O TE
max. 70 %
+5 °C to +40 °C
-25 °C to +55 °C
SAFETY
22
ZI-TS315-230 | TS315-400
Werbung
