Mafell PS 2-18 Originalbetriebsanleitung Seite 35

Defect
Burn marks on the cut surfaces
Chip ejection blocked
Saw blade vibrates in the work
piece
Saw blade stops - motor
continues to turn
Cause
The saw blade used is unsuitable
for the task or blunt
Wood is too damp
Extended cutting
without extraction
Saw blade is not correctly
positioned or dirty
Work piece not fastened
Saw blade is not correctly
positioned or dirty
Mechanical defect
-35-
Remedy
Replace saw blade
Clean chip ejection
operation Connect machine to an external
extraction, e.g. portable dust
extractor
Clean and / or position the saw
blade correctly
Fasten the work piece
Clean and / or position the saw
blade correctly
Take the machine to a MAFELL
customer service shop