Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
CLEANING AND STORAGE
Please note!
Do not clean the motor unit in the
■
dishwasher!
Always disconnect the mains plug from
■
the socket before cleaning!
Do not use harsh or abrasive cleaning
■
agents or cleaning pads for cleaning.
These can damage the surfaces.
Clean the accessories used and, if necessary,
the motor unit (11) after each use to prevent
the formation of germs.
Do not allow food residues to dry.
1. Ensure that the appliance is
disconnected from the power
supply.
2. Remove all used accessories from the
motor unit.
3. If necessary, wipe the motor unit with a
damp cloth. To remove heavier soiling,
use a little washing-up liquid.
4. Clean the accessories used under running
water with a little washing-up liquid.
They can also be cleaned in the
dishwasher. To maintain the quality of
the parts for as long as possible, they
should preferably be washed by hand.
5. Allow all parts to dry completely or dry
with a tea towel before storing.
6. Store away from dust and direct sunlight
in a cool, dry place out of the reach of
children and animals.
Some vegetables or fruit can
��
discolour the plastic parts. This is
normal and harmless and is not
covered by the warranty.
8
TROUBLESHOOTING
If the appliance does not work properly, check
whether you can solve the problem yourself. If
the problem cannot be solved with the following
steps, contact customer service.
Do not attempt to repair an electrical
appliance yourself!
The device does not work.
The blade attachment is not seated correctly in
the motor unit.
Correct the seat.
►
The mains plug is not properly inserted in the
socket.
Correct the seat. The
►
socket is defective.
Try a different socket.
►
The device switches off.
Food blocks the blades.
Remove the blade attachment and
►
carefully remove the blockage.
The appliance is overloaded because the
contents are too viscous or something has
got caught in the blades.
Remove the blade attachment and
►
remove some of the contents or add
liquid or carefully remove the blockage.
The appliance is overloaded because it has been
switched on continuously for too long.
Pull out the mains plug and allow the
►
appliance to cool down for a few
minutes.
Werbung
