Medion X10 SW Bedienungsanleitung Seite 150

Fig.  – Removing the fastening plug
If necessary, remove the roller at one end
of the main brush by loosening the fas-
tening plug from the drum. Remove any
hair that is caught on the drum.
Now put the brush back into the open-
ing.
Press the brush frame back onto the suc-
tion opening.
Fig.  – Inserting the brush
11.5. Cleaning the side brush
Switch off the device and place it upside
down onto a soft surface with the under-
side of the device facing upwards.
Clean the brush to remove dirt and hair.
Remove stubborn dirt from the brush
using a damp cloth.
150
Fig.  – Cleaning the side brush
Remove the side brush to make it easier to
clean.
Fig.  – Attaching the side brush
After cleaning, reattach the brush.
If the bristles become bent, place the brush-
es in hot water so that the bristles return to
their original shape.
11.6. Cleaning the wheel/drive
wheels
Lift the front wheel upwards and release
it from the mounting.
Clean it to remove dirt with a damp cloth.
After cleaning, reattach the wheel to its
original position while applying slight
pressure.