Medion X10 SW Bedienungsanleitung Seite 142

. Cable spool
. Connection for mains adapter
. Cable compartment cover
. Cable compartment
The robot vacuum and mop has a voice out-
put. Status and error messages are indicated
by voice outputs. These voice outputs are not
mentioned separately in the user manual as
they are self-explanatory.
In the medion Life+ app, you have the op-
tion of switching the voice prompts to your
desired language.
6. Preparing the robot
vacuum and mop
Remove all packaging materials, the
transport lock and plastic wrap from the
device.
Fig.  – Removing the transport lock
Turn the robot vacuum and mop onto its
underside and place it on a soft surface.
Place the side brush supplied vertically
on the drive shaft and press it on until
you hear it click into place.
Fig.  – Inserting the side brush
6.1. Connecting the
142
mains adapter
Turn the charging station around and
open the cable winding cover on the
underside.
a
Fig.  – Connecting the mains adapter
Plug the mains adapter connector into
the mains adapter socket and wrap the
mains cable twice around the mains ca-
ble winding.
Close the cover of the cable compart-
ment until you hear it click into place.
6.2. Sett ing up the charging
station
Position the charging station on a wall
with a level surface and avoid direct sun-
light.
Fig.  – Correct position
b