HomeMatic HM-RC-8 Bedienungsanleitung Seite 22

Start-up
During teach-in, please make sure you maintain
a distance of at least 50 cm between the devic-
es and the central control unit.
To teach-in your device to the central control unit, pro-
ceed as follows:
• Open the "WebUI" user interface in your browser.
Click the "Teach in devices" button on the right-hand
side of the screen.
• To activate teach-in mode, click "Start teach-in
mode".
• Teach-in mode remains activated for 60 seconds.
An information box shows how much teach-in time
remains.
• Within this teach-in time, activate the configuration
42
mode of your remote control. Therefore, remove the
cover and briefly press the teach-in button (G) of
your remote control with a pointed object.
• The remote control is now in configuration mode.
The device LED flashes green to indicate this. (To
exit configuration mode, briefly press the teach-in
button again.)
• As soon as communication between the remote
control and the central control unit has been estab-
lished, the device LED flashes orange. The device
LED lights up green to indicate that teaching-in has
been successful.
• After a short time, the newly taught-in device ap-
pears in the inbox of your software interface. The
button "Inbox (x new devices)" indicates how many
new devices have been taught-in successfully.
• If required, you can teach-in additional devices by
repeating the steps described above for each de-
vice.
Start-up
43