Kobra CYCLONE Betriebsanleitung Seite 38

9 ACCESSORIES
9.1 SCREENS
The KOBRA Cyclone is delivered with a 30 mm holes
standard screen unless specifically ordered with a different
screen. It is possible anyway to change the screen on the
Cyclone whenever a different shredding need arise (higher
security/bulk reduction degree or higher shredding
output). 5 different screens are available.
TECHNICAL SPECIFICATIONS
SCREENS:
Level 006
•
Part number 51.201
Shredding output: 70-80Kg (155-180 lbs) per hour
theoretical (less 25/30% real).
Level 005
•
Part number 51.202
Shredding output: 100-120Kg (225-265 lbs) per
hour theoretical (less 25/30% real).
Level 004
•
Part number 51.203
Shredding output: 200-230Kg (445-500 lbs) per
hour theoretical (less 25/30% real).
Level 003
•
Part number 51.204
Shredding output: 300-320 Kg (670-715 lbs) per
hour theoretical (less 25/30% real).
Level 002
•
Part number 51.205
Shredding output: 400-420Kg (900-940 lbs) per
hour theoretical (less 25/30% real).
Additional screens are available on special requests. For
more information the KOBRA dealer should be contacted.
Compliant with: - directive LVD 2014/35/UE
- directive RoHS 2011/65/UE
- directive 2014/30/UE
The manufacturer: ELCOMAN SRL
VIA GORIZIA, 9 - 20813 BOVISIO MASCIAGO (MB) – ITALY
Declares herewith that the following paper shredders comply with the standards of the directive LVD 2014/35/UE
- KOBRA series: Kobra Cyclone
The standards applied are:
EN IEC 62368-1:2020 +A11:2020
EN 55014-1 :2021
EN 55014-2 :2021
KOBRA Cyclone
OF THE AVAILABLE
DECLARATION OF CONFORMITY
EN 61000-3-2 +A1 :2021
EN 61000-3-3 +A1 :2021
36
9.2 PLASTIC WASTE BAG
(Part number: 51.221)
KOBRA Cyclone is delivered with 10 plastic waste bags.
Additional original plastic waste bags packed in sets of 10
bags each can be purchased.
The Cyclone should be operated with original plastic
waste bags only.
The original plastic waste bag has been designed and
tested to offer the best performances and to withstand
the turbine pressure during
operations as well as to withstand the centrifugal forces
and the friction of the shredded material.
9.3 FILTER BAG
(Part number: 51.225)
KOBRA Cyclone is delivered with 3 filter bags which
collect the shredding dust. Additional original filter bags
packed in sets of 10 bags each can be purchased.
The Cyclone should be operated with original filter bags
only.
The original filter bag has been designed and tested to
offer the best performances and to collect the maximum
quantity of dust with the highest efficiency and sucking
action.
Filter bag should be replaced every 20/25 plastic waste
bags of shredded material.
Check filter bag level before replacing filter bag.
Bovisio Masciago, 31.01.2024
A. De Rosa
Technical Office
intensive shredding
DI-129/13/14.04.2022