HP LaserJet MFP Analog Fax Accessory 300 Faxhandbuch Seite 59

Setting dialing mode
The dialing mode setting sets the type of dialing used, either tone
(touch-tone phones) or pulse (rotary-dial phones).
To set dialing mode, perform the following steps.
1
2
3
4
5
Setting redial rules
To set redial-on-busy
The redial-on-busy setting selects the number of times (0 through 9)
the fax accessory redials a number when it is busy. The interval
between retries is set by the Redial Interval setting.
1
2
3
4
5
To set redial-on-no-answer
The redial-on-no-answer setting selects the number of times the fax
accessory redials if the number dialed does not answer. The number
of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending on the
country/region setting. The interval between retries is set by the redial
interval setting.
1
2
ENWW
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX SEND. Use the down arrow key to
scroll to DIALING MODE.
Touch DIALING MODE to display the dialing mode settings.
Touch TONE (default) to set the fax for tone dialing, or touch
PULSE to set the fax for pulse dialing.
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX SEND.
Touch REDIAL ON BUSY to display the redial-on-busy setting
screen.
Use the up and down arrows to select the number (default=3),
and then touch OK.
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Setting dialing mode 51