HP LaserJet MFP Analog Fax Accessory 300 Faxhandbuch Seite 56

Setting the modem volume
To set the modem volume, perform the following steps.
1
2
3
4
5
Setting the ringer volume
To set the ringer volume, perform the following steps.
1
2
3
4
5
Setting error correction mode
Normally, the fax accessory monitors the signals on the telephone
line while it is sending or receiving a fax. If the fax accessory detects
an error during the transmission and the error correction setting is on,
the fax accessory can request that the error portion of the fax be sent
again.
You should turn off error correction only if you are having trouble
sending or receiving a fax and if you are willing to accept the errors in
the transmission. Turning off the setting might be useful when you are
trying to send a fax overseas or receive one from overseas, or if you
are using a satellite telephone connection.
To enable or disable error correction mode, perform the following
steps.
1
2
48 Chapter 3 Configuration
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Touch FAX SETUP OPTIONAL to display the optional
settings menu.
Touch MODEM VOLUME to display the volume settings.
Touch OFF, MEDIUM (default), or LOUD to set the volume.
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Touch FAX SETUP OPTIONAL to display the optional
setup items.
Touch RINGER VOLUME to display the settings.
Touch OFF, MEDIUM (default), or LOUD to change the volume.
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
ENWW