Parkside PDT 40 F4 Bedienungs- Und Sicherheitshinweise Seite 13

mask, non-slip safety shoes, a
hard hat and hearing protec-
tion can lessen the risk of
injuries.
Hold the device properly, in
„
order to be able to react to
normal or sudden movements,
such as, for example, recoil.
After using the tacker, discon-
„
nect the compressed air supply
from the tool and store the tool
safely by laying it on its side.
The device must not be put
down for storage.
Hazards due to flying
objects
The fastening device must not
„
be connected when you are
unloading fasteners, carrying
out adjustments, removing
blockages or replacing acces-
sories.
During operation, please
„
ensure that the fasteners
always penetrate properly
into the material and are
not deflected or incorrectly
positioned pointing in the
direction of the user and/or
a third party.
During operation fragments
„
of the workpiece or parts of
the fixing or magazine system
may be ejected.
Make sure that the device is
„
always firmly positioned on
the workpiece and cannot slip.
Always wear impact-resistant
„
eye protection with side
shields when operating the
device.
The risk for others must be
„
assessed by the user.
Hazard due to repeated
movements
When using the fastening
„
device over longer periods of
time, this could cause the user
to experience pain in their
hands, arms, shoulders, neck
or other parts of the body.
When using the device, the
„
user should adopt a comforta-
ble posture, stand on a stable
surface, and avoid postures
making it difficult to maintain
balance. The user should
change their posture during
long work periods, thereby
helping to minimise unpleasant
sensations and fatigue.
If the user experiences such
„
as persistent or recurring
pains, aches, palpitations,
areas which ache, tingling,
GB/IE/NI/CY/MT
13