Parkside PRMA 40-Li C1 Originalbetriebsanleitung Seite 38

GB MT
Trouble Shooting
Problem
Appliance
doesn't start
Motor stops
Result unsatisfactory
or motor labours
Blade fails to turn
Strange noises, rat-
tling or vibrations
38
Possible Cause
Rechargeable battery (
discharged
Rechargeable battery (
inserted
Defective release button (
or start lever ( 17)
Defective motor
Grass too long
Blockage by foreign object
Cut height too low
Blade ( 23) blunt
Blade area blocked
Blade ( 23) assembled
incorrectly
Blade ( 23) blocked by grass
Blade screw ( 24) loose
Blade screw ( 24) loose
Blade ( 23) damaged
Fault Fixing
Check the charge status,
charge rechargeable battery
9)
(observe the separate opera-
ting instructions for the battery
and charger)
Insert rechargeable battery
9) not (observe the separate opera-
ting instructions for the battery
and charger)
16)
Repair by customer services
Set a greater cut height. Lift
the front wheels slightly by
pressing down on the bow-
type handle (
Remove the foreign object
Set a higher cut height
Have the blade sharpened or
replace it
Clean the equipment
Install the blade correctly
Remove the grass
Tighten the blade screw
Tighten the blade screw
Replace the blade
1).