Parkside PRMA 40-Li C1 Originalbetriebsanleitung Seite 31

Switch off the apparatus, remove the
ignition key (
blades to come to a standstill.
Mounting/removing the
grass collection box
Mounting the grass collection box
1. Hold the grass collection box at the
handle (13c).
2. To mount the grass collection box (13),
lift the impact protection (4).
3. Suspend the grass collection box (13)
from both receptors.
4. Fold the impact protection (4) over the
grass collection box (13). This will hold
the grass collection box in the correct
position.
Removing the grass collection box
5. Lift the impact protection (4).
6. Unmount the grass collection box (13).
7. Fold the impact protection (4) back
over the device housing (12).
Work may not be carried out
using the device without the
impact protection or grass
collection box. There is a risk
of injury.
Emptying the grass
collection box
1. Remove the grass collection box.
2. Hold the grass collection box at the
handle (13c).
3. Tip the grass collection box using the
auxiliary handle (13d).
4. Pour the cut grass into a suitable cont-
ainer.
10) and wait for the
Filling level indicator
A level indicator (
the grass collection box (
Filling level indicator open:
Grass collection box empty.
Filling level indicator closed:
Grass collection box filled.
Setting the cutting
height
The apparatus has 7 positions for adjusting
the cutting height:
25/30/38 mm - low cutting height
45/55 mm - medium cutting height
65/75 mm - large cutting height
1. Hold the carrying handle (
lift the device or push the device down.
2. Grip the lever (7) for adjusting the cut-
ting height and move it past the ratchet
mechanism to the desired cutting
height.
The correct cutting height is between 25
and 45 mm for an ornamental lawn and
about 45 - 65 mm for a utility lawn.
A high cutting height should be
selected for the first mowing of the
season.
Inserting/removing the
rechargeable battery
Switch off the apparatus, remove the
ignition key (
blades to come to a standstill.
1. To remove the battery (9) from the de-
vice, press the release button (9a) on
the battery and pull the battery out.
GB MT
26) is attached above
13).
6) and
10) and wait for the
31