probst HVZ-ECO Betriebsanleitung Seite 79

Adjustments
2
5.9 Height of the side tension
Set the height of the side tension to the middle of the
block layer:
1) Open the side tension.
2) Remove the nut and screws of the side
tensioner (). Hold the side tensioner firmly
so that it does not fall down.
Risk of injury to hands!
51400034
1
pic. 25
pic. 27
3) Set the side tension to the appropriate
position ().
4) Re-insert both screws and secure with nuts.
5) Close the side tension and check that the
side tension is approximately in the middle of
the block layer.
27 / 40
pic. 26
pic. 28
GB