Num'axes Canifugue FUG1032 Gebrauchsanleitung Seite 31

− The transmitter is not waterproof and must be installed indoors in a dry location (for example garage or garden shed):
it can withstand temperature changes but will be damaged by water.
− The system activates automatically as soon as the dog enters the unauthorized zone. However, despite the product's
excellent reliability, it may be set off unintentionally.
− To avoid unintentional triggering, your dog should not wear a tag, metallic collar, or any other collar together with the pet
fencing collar.
− Do not place or keep the unit in places exposed to high temperatures.
− Remove the battery from the receiver collar if you are not using the product for 3 months or more.
− Never leave a discharged battery in the receiver collar: leakage could damage your product.
− Carefully check that your pet fencing system operates properly if it has not been used for some time.
− Do not adjust or test your product while the collar is on your dog.
− The collar should not be worn inside the house.
− The pet fencing system is a virtual boundary; you cannot consider it as a solid, foolproof barrier for all dogs.
− Each animal reacts to static stimulations and to training in a different way. Therefore, NUM'AXES cannot guarantee that your
dog will stay, in all circumstances, within the perimeter you have defined. There always will be a risk of escape. Instinct
can overcome training especially when outside distractions tempt your dog (cats, other dogs, balls, bikes, neighbours,...).
− Your dog's temperament may not be compatible with the product. Do not hesitate to contact a vet or professional trainer
for any further advice.
• Maintenance
Do not clean the collar with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and neutral detergent.
The strap can be washed with soapy water.
In order to maintain water tightness, we recommend the replacement of the seal located in the receiver collar every year.
• Troubleshooting
− Should your pet fencing system develop a fault, first read this guide over, then check the collar battery and replace it if
necessary. Also check that you are using the product correctly.
− Check the fit and tightness of the collar on your dog's neck. Make sure the contact points are in contact with the animal's
skin. If necessary, replace the short contact points with the long ones.
− Make sure the contact points are correctly tightened on the collar.
− Check the wire connection to the transmitter.
− Check the transmitter power supply (when the transmitter is On, the green indicator light is On).
− If you encounter any problem of detection distances, check the condition of the wire and of the connections (oxidation,
nick in the wire).
− Reinitialize the collar as follows:
guide canifugue - FUG1032 indice B.indd 31
31
28/06/2018 14:40