Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The table below indicates how your collar operates according to the selected mode:
Number of beep sounds heard when
switching modes
1
2
4
5
7
8
To change the stimulation level, proceed in the following way:
− When switching on the collar, keep the magnetic key in contact with the
Diagram 5). After the beep sound indicating that the collar is on, a series of beep sounds is emitted (from 1 to 8) indicating
the selected level. Levels 1 to 8 run through as long as you leave the magnetic key in contact with the
− Move the magnetic key away from the collar as soon as you have reached the desired level. The collar will memorize your
selected level. Next time you will switch on the collar, it will be in the level you selected last.
•
Safety features
The pet fencing system comes complete with 3 safety features:
• wire break alarm
If the antenna wire breaks or if a connection fails, the transmitter will alert you to this operating default by emitting continuous
beep sounds.
• warning zone evacuation feature
After 20 seconds of continuous presence in the warning zone, your dog will be signalled to leave the zone by the emission of
a few short stimulations (stimulation level depending on the selected mode).
• stimulation zone evacuation feature
If your dog remains in the stimulation zone for more than 20 seconds, the receiver collar stops emitting stimulations. The
normal functioning resumes when your dog leaves this zone.
guide canifugue - FUG1032 indice B.indd 28
Mode
Stimulation level
1
low stimulation levels:
2
for small dogs or dogs with sensitive temperament
3
3
4
medium stimulation levels:
5
for medium dogs or dogs with average temperament
6
6
7
strong stimulation levels:
8
for large dogs or dogs with difficult temperament
28
symbol located on the front of the collar (ref.
symbol.
28/06/2018 14:40
Werbung
