Silverline 312279 Originalbetriebsanleitung Seite 4

EN
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even
if you are familiar with similar products, it is necessary to read this manual carefully to
ensure you fully understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for future reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries.
For indoors use only!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
4
Original Instructions
Technical Abbreviations Key
V
~, a.c.
A
n
0
°
Ø
Hz
W
min
-1
dB(A)
Specification
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230-240V~ 50Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95W
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1350min
Grinding wheel: . . . . . . . . . . . . . . . . . . . . . . . . . .ø60mm x 8mm, 100 Grit
Compatible drill bits: . . . . . . . . . . . . HSS and carbon steel twist drill bits
Drill bit capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10mm
Sharpening point angle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118°
Power cord length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2m
Ingress protection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.95kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound Pressure L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75.3dB(A)
PA
Sound Power L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88.3dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Volts
Alternating current
Ampere
No load speed
Degrees
Diameter
Hertz
Watt
Operations per minute
Decibel sound level (A weighted)
-1