Maintenance And Environmental Protection; Service Instructions - Meister BSB 1050 E Originalbetriebsanleitung

5402390-Schlagbohr-man 23.01.14 10:49 Seite 43
clockwise switch (2) to clockwise
rotation. Activate the electronic
revolution regulation by pressing the
on/off switch. Set the revolution
selection using the adjusting wheel on
the on/off switch.
Drilling in cement
Activate the hammer drill function (1)
, set the clockwise/anti-
clockwise switch (2) to clockwise
rotation. Start with low revolutions.
Depending on the properties of the
material and the diameter of the drill,
switch on the first and second gears (9)
with the device at a standstill (Fig. 2).
This changes the impact rate.
To remove a stuck drill, wait until
the machine has come to a
standstill, and switch to anti-
clockwise rotation. With the drill running
anti-clockwise, carefully pull it out of the
drilled hole.
10 – Maintenance and
environmental
protection
Before performing any care or
maintenance work, disconnect from the
power. Clean the machine with a damp
cloth. Do not use solvents. Dry well.
Ensure that the ventilation slots are kept
free of dust. Before each use, check the
machine, the cable and accessories to
ensure that they are not damaged. Have
any repairs necessary completed by a
specialist.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in the
household waste! They are to be
collected separately, in accordance
with the 2012/19 EU directive for the
disposal of electrical and
electronic waste, and
sent for proper and
environmentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• Meisterbasic devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
• Meisterbasic devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
43