•
With cuvette adapter Z: 10 mm square cuvettes.
Note: These cuvettes must be inserted with cuvette adapter Z.
Note: In the event of severe contamination, you can replace the cuvette
compartment (2).
Figure 2 Cuvette compartments and cuvette adapter Z
1
Cuvette compartment )1( for round cuvettes
2
Cuvette compartment )2( for square cuvettes, cuvette adapter Z installed
Installation of cuvette adapter Z
1.
Open the cuvette compartment.
2.
Insert cuvette adapter Z into the cuvette compartment )2( so that
the arrow on the cuvette adapter is pointing toward the cuvette
compartment )1(
)Figure
2(.
Note: The arrow on the cuvette adapter indicates the direction of the light
beam path.
English 88