Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Performance
LICO 690
specifications
Altitude
2000 m
Pollution degree
2
Overvoltage category
II
Environmental
Indoor use only
conditions
Power supply
External power supply
General Information
Safety information
Read through the entire user manual carefully before you unpack the
device, set up and put into operation. Pay attention to all danger and
caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
To make sure that the protection provided by this instrument is not
impaired, do not use or install this instrument in any manner other than
that specified in these operating instructions.
D A N G E R
Indicates a potentially or imminently hazardous situation that, if not avoided,
results in death or serious injury.
WA R N I N G
Indicates a potentially or imminently hazardous situation that, if not avoided, may
result in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
English 83
LICO 620
Indicates a situation that, if it is not avoided, can lead to damage to the device.
Information that requires special emphasis.
Note: Information that supplements points in the main text.
Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or
damage to the instrument could occur if not observed. For symbols
attached to the device, corresponding warning notes are found in the
user manual.
The manufacturer is not responsible for any damages due to misapplication or
misuse of this product including, without limitation, direct, incidental and
consequential damages, and totally excludes such damages as permitted under
applicable laws.
The user is solely responsible to identify critical application risks and install
appropriate mechanisms to protect processes during a possible equipment
malfunction.
N O T I C E
This symbol may be attached to the device and references the
operation- and/or safety notes in the user manual.
This symbol on the device is an indication of hot surfaces.
Electrical equipment marked with this symbol may not be disposed of
in European domestic or public disposal systems after 12 August
2005. In conformity with European local and national regulations )EU
Directive 2002/96/EC(, European electrical equipment users must
now return old or end-of life equipment to the manufacturer for
disposal at no charge to the user.
Note: For return for recycling, please contact the equipment
manufacturer or supplier for instructions on how to return
end-of-life equipment, manufacturer-supplied electrical
accessories, and all auxiliary items for proper disposal.
WA R N I N G
Werbung
