Werbung
Verfügbare Sprachen
Verfügbare Sprachen
El
Using the timer
Make sure that the clock has been set correctly before setting the timer. (See page 18)
Make sure that the source component is connected to an amplifier with a timer function, and that the CD or cassette tape has been inserted
into the appropriate component.
@
Refer to page 40 for details on changing the date setting.
@ Since MUTING is automatically turned on when the timer is used to record, the sound can not be heard during recording.
9
1
3,5
4,6, 8
@
Starting playing (or recording) at a
selected time
1. Press the PROGRAM/CHECK button to enter
the timer program mode. "PGM' is shown on the
display.
PROGRAM/CHECK
WEEKDAY
ESPGM
2. Select your desired
mode
pressing
any of
the following buttons.
TIMER
WEEKDAY
WEEKEND
ONCE
WEEKDAY:
When you want to start playing at certain time
weekday.
WEEKEND:
When you want to start playing at a certain time
during the weekend (Saturday and Sunday).
ONCE: When you want to start and stop playback only once.
REC: When you want to start and stop recording only once.
The name of the chosen mode will light up on the display.
3. Set the starting time
using the TUNING/
PRESET dial.
TUNING / PRESET
fooN
'a
pesraee
\ Tarp
af] i Nf
"aMen
- tA
4. Press the MEMORY
button to store the
"ON" time into memory.
MEMORY
©
After storing the "ON" time, the R-32/22 will suggest an "OFF"
time of one hour after the "ON" time you specified. This can be
changed to the time you desire.
5. Set the stopping time using the TUNING/
PRESET dial.
WEEKDAY \
laurd Pie
>] Pie} j--
Bs eae
Is
ha thd
6. Press
the
MEMORY
button
to store
the
"OFF" time into memory.
7.Use
the SOURCE
button
to select
the
source.
SOURCE
Cc)
Select the component or mode you wish to turn on at the speci-
fied time, from CD, TAPE, FM or AM.
If you have selected REC in procedure 2, this will select the
recording source, either FM or AM.
8. Press the MEMORY
button to complete the
operation.
WEEKOAY
aro,
Yt
|
/
{
ied
rin
'
—
~~
——
77T 11s
MEMORY
©
9. Turn the R-32/22 power off.
All the components connected to the R-32/22 will enter stand-by
mode.
POWER
STAND-BY / ON
mM
Canceling the timer
Press the button of the mode that you want to cancel and that
mode's indicator will turn off.
TIMER
WEEKDAY
WEEKEND
ONCE
Werbung
