Werbung
Verfügbare Sprachen
Verfügbare Sprachen
M
75/300 ohm antenna adapter (worldwide models only)
Connecting the coaxial cable
p
Connecting
the
T-shaped
aN
FM antenna or 300 ohm FM
outdoor antenna.
/
. With your fingernail or a
2. Remove the transformer wire A
. Prepare
the coaxial
cable
as
small
screwdriver,
press
from slit B and insert it into slit
shown
in the diagram. Connect
the
stoppers
outwards
C.
the 75/300 ohm antenna adapter
and remove the cover.
to the coaxial cable
@ Insert the end of the cable.
@ Clamp it in place with pliers.
@ Connecting speakers
@ SPEAKER IMPEDANCE: 6 OHMS MIN/SPEAKERS
Please not short the speaker cables or do not connect a speaker with a low impedance which will cause trouble.
@
Connect the red terminals "+" of the speaker and tuner amplifier, and the black terminals "—" of the speaker and tuner amplifier.
Lift the lever and
insert the
wire. When the wire has been
inserted firmly into the hole,
release the lever.
PS-32/22
PS-32/22
-M
}
TOEO!
756
©
AC OUTLET
(OLTAGE SELECTOR
ANTENNA
oe: Dans
'aM
+
|
|
.
Pans
AMT!
iM
=|
TOCD A TAPE®
S H B EK HAZARD
20 nor OPEN
i
Kl | CHOC ELECTRIQUE
we Pas ouvar,
m@ = When you put the speakers near the TV set
m@
Removal and replacement of the
speaker grille (PS-32 only)
The speakers of this system are shaped to prevent electromag-
netic waves which may cause uneven color on a TV screen.
However, depending on the way they are installed, they may
still cause uneven color. If this happens, turn off the TV for 15—
30 minutes. If uneven color remains after doing this, put more
distance between the speakers and the television.
. Remove the bottom of the speaker grille.
. {f you pull the top to your side, it will come off the main unit.
. When you replace it, push the projections at the four corners
into the holes on the speaker.
tronic musical instruments.
Continuous single signal sounds from the CD player.
Werbung
