Adjustment Of Splitting Wedge; Sets The Speed For The Saw Blade And Spindle Shaper Speed; Notes Of Using The Circulas Saw - Holzmann K5 315VF-2000 Originalbetriebsanleitung

13.4.3 Adjustment of splitting wedge

The riving knife is adjusted according to the size of
the saw blade.
To do this, loosen the screw E and align the riving
knife accordingly.
After setting the correct distance tighten the screw E
again firmly.

13.4.4 Sets the speed for the saw blade and spindle shaper speed

The combined 5-operation machine has 4 different blade speeds
(see technical data).
Disconnect the machine from the power supply.

Open the machine door.

The wing screw open until the belt is loose.

Place the belt to the desired position.

Tighten the thumb screw again.

Close the machine door again.

13.5

Notes of using the circulas saw

Cross-cutting of workpieces made of solid wood
When performing this operation, the following equipment shall be used for safe working:
 The table extension
 the miter gauge
 the guard of the saw blade
 the riving knife
 the hold-down
 the insert in the table
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
5-fach Kombination / combined 5-operation machine K5 315VF-2000
ASSEMBLY
thumbscrew
Seite 48