14.2.3 Assembly / disassembly of the saw blade and scoring unit
Adjust the cutting height to the greatest degree.
Move the sliding table all the way to the right. Open the safety cover.
Put the wrench on the flange. With the Allen key fix the drive shaft and rotate the flange from
(left hand thread).
Then the saw blade can be installed and tightened in the correct direction of rotation.
The scoring blade is mounted with equally and dismantled.
14.2.4 Adjustment of splitting wedge
14.2.5
Mounting the saw blade guard
The blade guard is mandatory to install the riving knife. Working with the sliding table saw with-
out blade guard is prohibited.
HOLZMANN Maschinen GmbH
www.holzmann-maschinen.at
Formatkreissäge / panel saw FKS 305VF-2600 / 3200
ASSEMBLY
Seite 33