8
[Fig. 8-4-10]
[Fig. 8-4-11]
Ⓐ
[Fig. 8-4-12]
[Fig. 8-4-13]
①
②
8
Ⓑ
Ⓐ
①
Ⓐ
8.4
Ⓐ
Insert the minus screwdriver toward the arrow
pointed and wrench it to remove the cover.
A flat screwdriver whose width of blade is
between 4 and 7 mm (5/32 - 9/32 inch) must
be used.
Ⓓ
Ⓒ
Ⓐ Screw (M4 × 30)
* When installing the lower case directly on the wall or the ceiling,
use wood screws.
① Hang the cover to the upper hooks (2 places).
② Mount the cover to the lower case
Ⓐ Cross-section of upper hooks
Ⓐ Thin-wall portion
Ⓑ Bottom case
Ⓒ Remote controller wire
Ⓓ Conducting wire