Sigma PC 26.14 Bedienungsanleitung Seite 7

Button functions
3
the PC 26.14 has five buttons:
toGGLe/-, toGGLe/+, StoP, StArt, and enter
STOP button:
this button takes you back a level
within the menu structure. In training
mode, stop the training session by
pressing this button.
Resetting training data without
saving: Press and hold the StoP
button.
TOGGLE/- and
TOGGLE/+ buttons:
toGGLe/+ enables you to navigate to the
right in the main menu; toGGLe/- takes
you back again. If you are at a point at which
values can be configured, use toGGLe/+
to set a higher value and toGGLe/- to set
a lower value.
Activating/deactivating the light mode
Press the toGGLe/- And toGGLe/+
buttons simultaneously. Pressing the
buttons simultaneously a second time
switches the display backlight off again.
the light stays on for approx. three seconds.
12
ENTER button:
Use this button to access the main
menu and confirm the entries.
You can navigate in the submenu
of the applicable menu item and
access any further sub-items
available.
START button:
Press the StArt button to start
training.
Pressing the StArt button again
while training marks a lap.
If you have paused a training
session by pressing the StoP
button, you can restart the timer by
pressing the StArt button again.
Lap view:
Press and hold the StArt button.
Press the StoP button to exit
lap view.
13