Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.4
Adjusting the system
5.4.1
Setting the running time (auger screw)
The auger screw is actuated depending on the inlet quan-
tity and auger basket layout. An immersion pipe in the inlet
of the coarse filter unit detects any backflow or build-up in
the inflowing wastewater and triggers operation of the auger
screw.
The set levels can be viewed under the menu item
Parameters|
, the levels can also be set or adjusted
under 3.6:
1.6.3 or 3.6.3
ON level
1.6.4 or 3.6.4
OFF level
1.6.5 or 3.6.5
Alarm level
The system continues to run even if the alarm level is
reached.
016-141_01
|1.6
Installation and operating instructions
69 / 92
Werbung
