Blackmagic Design Cinema Camera 6K Installation Seite 363

Group ID Parameter
4.0 Brightness
Exposure and focus tools
4.1
4.2 Zebra level
4.3 Peaking level
Display
4.4 Color bar enable
4.5 Focus Assist
4.6 Program return feed enable
4.7 Timecode Source
5.0 Tally brightness
5.1 Front tally brightness
Tally
5.2 Rear tally brightness
6.0 Source
Reference
6.1 Offset
Type Index
fixed16 –
uint16
[0] = bit field
bit field
uint16 [1] = target displays
bit field bit field
fixed16 –
fixed16 –
int8 –
[0] = focus assist
method
int8
[1] = focus line color
int8 –
signed
[0] = source
byte
fixed16 –
fixed16 –
fixed16 –
int8 enum –
int32 –
Minimum Maximum
0.0 1.0
– –
– –
0.0 1.0
0.0 1.0
0 30
– –
– –
0 30
– –
0.0 1.0
0.0 1.0
0.0 1.0
0 2
– –
デベロッパーの皆様へ
Interpretation
0.0 = minimum, 1.0 = maximum
bit flags:
[0] = Zebra
[1] = Focus Assist
[2] = False Color
bit flags:
[0] = LCD
[1] = HDMI
[2] = EVF
[3] = Main SDI
[4] = Front SDI
0.0 = minimum, 1.0 = maximum
0.0 = minimum, 1.0 = maximum
0 = disable bars,
1-30 = enable bars with timeout
(seconds)
0 = Peak,
1 = Colored lines
0 = Red,
1 = Green,
2 = Blue,
3 = White,
4 = Black
0 = disable, 1-30 = enable with
timeout (seconds)
0 = Clip,
1 = Timecode
Sets the tally front and tally rear
brightness to the same level.
0.0 = minimum,
1.0 = maximum
Sets the tally front brightness.
0.0 = minimum,
1.0 = maximum
Sets the tally rear brightness.
0.0 = minimum,
1.0 = maximum
Tally rear brightness cannot be
turned off
0 = internal,
1 = program,
2 = external
+/- offset in pixels
363