Preparing Media Using Your Camera - Blackmagic Design Cinema Camera 6K Installation

Preparing Media using your Camera

1 Tap either storage indicator at the bottom of the LCD touchscreen to enter the storage
manager. Tap the 'format' button at the bottom of the screen.
The 'format' button allows you to select the media storage you want to prepare
for recording
2 On the 'select media' page, tap on the storage media that you want to format and confirm
your selection.
NOTE If your camera is connected to a drive hub, such as a Blackmagic MultiDock,
the drive list will display all the SSD drives available to your camera. To select the drive
you want to record to, tap the drive you want, then tap the 'use drive' button.
3 Tap 'edit reel number' if you would like to manually change the reel number. Use the
keypad to enter a new reel number and press 'update' to confirm your selection.
4 Choose OS X Extended or exFAT format and tap the format button.
Tap 'edit reel number' to manually edit the reel number
5 A confirmation screen will allow you to confirm the media to be formatted, the selected
format and the reel number. Confirm your selection by tapping the format button.
Tap 'cancel' to cancel the format.
Storage Media 12