1 | MI_2202: Energy optimisation iCombi Pro Classic
6-1/1, 6-2/1, 10-1/1 & 10-2/1
n
The kit: 87.01.924S contains the following components:
IO module expansion, Energy_opt.
Cable set Sico. with auxiliary switch
20-1/1 & 20-2/1
n
The kit: 87.01.925S contains the following components:
IO module expansion, Energy_opt.
Cable set Sico. with auxiliary switch
Earth terminal WKFN 4 SL/35
General information
This information "MI_2202: Energy optimisation iCombi Pro-Classic" replaces
the following modification instructions:
MI_2076
n
MI_2110
n
MI_2117
n
MI_2118
n
MI_2119
n
MI_2120
n
Target group
This document is intended for skilled technicians, who have been certified
n
by the manufacturer after attending training and safety instructions.
Installation, inspection, maintenance, and repair work must only be carried
n
out by trained technicians.
It is recommended that only technicians authorised by the manufacturer
n
perform inspection, maintenance and repair work.
The unit may not be used, cleaned, or maintained by children. The unit may
n
not be used for play. This is prohibited even under supervision.
The unit may not be used, cleaned, or maintained by people with limited
n
physical, sensory, or mental capacity or those without the necessary ex-
perience or knowledge, unless such people are supervised by a person
who is responsible for their safety and who has been informed of the haz-
ards of the unit.
10 / 104
Component
Cable A10-3xAxx
Cable A10-2xAxx
Cable A10-1xAxx
Retaining clip for PCB
Component
Cable A10-3xAxx
Cable A10-2xAxx
Cable A10-1xAxx
Retaining clip for PCB
Article number
42.00.324
40.06.849
40.06.850
40.06.854
40.07.642
40.03.756
Article number
42.00.324P
40.06.849
40.06.850
40.06.854
40.07.643
40.03.756
40.04.638