The Machine - Ikra IPM 33 TL Gebrauchsanweisung

The Machine

Do not use your power scythe attachment during other
people's rest periods.
Preparations
Always wear a harness.
• Vertical cut (with straight cutter bar)
Large working radius even without additional aids
• Vertical cut (with angled cutter bar)
Cutting without standing directly next to hedge
• Horizontal cut (with straight cutter bar)
Cutting without standing directly in front of the hedge
- large working radius
• Overhead cut (with angled cutter bar)
Hold the hedge cutter above your head and swing it in
an arc to make maximum use of its reach.
Any working position above head height is tiring. To
minimize the risk of accidents, work in such positions for
short periods only. Set angle of adjustable cutter bar to
maximum so that the unit can be held in a lower, less tir-
GB-30