Ordering Replacement Parts; Disposal And Recycling - EINHELL TC-PG 55/E5 Originalbetriebsanleitung

7.6 Changing a defective fuse
Open the fuse holder (Fig. 16a/Item A) and repla-
ce the defective fuse (Fig. 16b) with a new one.
Caution! Use only fuses of the same type previ-
ously installed in the respective fuse holder.
Pay attention in particular to the maximum current
strength (engraved in the fuse).
If you have any doubt, please contact our Custo-
mer Service or a qualifi ed electrician.
7.7 Maintenance
•
There are no parts inside the equipment
which require additional maintenance.
7.8 Storage
•
Leave the machine to cool (approx. 5 minu-
tes).
•
Clean the exterior housing of the machine.
•
Store the machine in a cold, dry place where
it is out of the reach of ignition sources and
inflammable substances.

7.9 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_TC-PG_55_E5_SPK9.indb 25 Anl_TC-PG_55_E5_SPK9.indb 25
GB
9. Transportation
•
Use the handle for transporting the generator
and use it to move the generator about.
•
Transport the equipment only by carrying it by
the transport handle.
•
Protect the equipment against unexpected
knocks and vibrations.
- 25 -
17.06.2019 07:18:06 17.06.2019 07:18:06