Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ADVANCED SETTINGS
1 Open menu with »MENU« button.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select menu item »TV« with »
press »
« to confirm.
V
– »TV« menu is active.
4 Select the line »Advanced« with »
»
« and press »OK« to confirm.
Λ
Settings > TV > Advanced
Picture
Sound
Auto Sleep
Show Logo Display
Power LED Backlight
Power Saving Mode
Change Area
Note:
Additional operations are explained in the
7
following sections.
Auto sleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup,
unless the television receives any signal, or
keys or, according to European regulations, the
remote remains untouched for 5 minutes.
1 From the »Advanced« menu use »
»
« to select the line »Auto Sleep«.
Λ
2 Select the switch-off time with »
Note:
Set the function to »Off« with »
7
switch off.
3 Press »BACK < « to go back one menu
level or press »EXIT« to end the setting.
52 / 89 TR
«, »
V
<
>
« or »
« and
« or
V
Tuesday
xx xxx xxxx
Source
TV
Timer
Parental
4 Hours
No
Medium
Off
Back
BACK
EXIT
« or
V
<
>
« or »
<
>
« or »
------------------------------------------------------------------------------
Store logo view
«,
This function is intended for feature introduction
Λ
at stores. When »On« is selected, feature logos
are displayed.
1 From the »Advanced« menu use »
»
« to select the line »Shop Logo Display«.
Λ
2 Select »Yes« with »
Note:
Set the function to »No« with »
7
switch off.
3 Press »BACK < « to go back one menu
level or press »EXIT« to end the setting.
Power LED brightness
You can adjust power (stand-by) LED brightness
in operation mode of television.
1 From the »Advanced« menu use »
Exit
or »
« to select the line »Power LED
Λ
Brightness«.
<
2 Use »
« or »
»High«, »Medium« or »Low«.
3 Press »BACK < « to go back one menu
level or press »EXIT« to end the setting.
«.
« to
V
<
>
« or »
«.
<
« or »
V
>
« to set the brightness to
Television / User Manual
« or
>
« to
«
Werbung
Inhaltsverzeichnis
Fehlerbehebung
