Beko B32L 5745 4B Bedienungsanleitung Seite 111

INITIAL SET-UP
Searching television channels with sat-
ellite signal (DVB-S)
11 Select the option »Satellite (DVB-S/S2)«
with » « or »
V Λ
confirm.
– The satellite Astra 19.2° East is preset.
12 Confirm the push button »Continue« with
» « (blue).
Notes:
Select the Channel Type.
7
Press » « or »
V
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
Select Scan Mode.
7
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press » « or »
V
select and mark or unmark the »Free« and/
or »Scrambled« items.
13 Press » « (red) to start searching.
– »Digital Searching« menu appears and
the scan for TV channels begins.
– The scan is complete as soon as the
message »Search is completed!« appears.
14 Select the »Channel Editor« with »OK«.
20 / 89 TR
---------------------------------------------------------------------------------------------------
« and press »OK« to
« to select whether you
Λ
« and press »OK« to
Λ
Tuning cable digital television channels
(DVB-C)
15 Select the option »Cable (DVB-C)« with
» « or » « and press »OK« to confirm.
V Λ
16 Select the line »Scan Type« with »
» «.
Λ
Select the option »Quick« or »Full« with »
>
or » «.
– »Quick« scanning function sets the
channels according to the cable operator
information in the broadcasting signal.
– »Full« scan function scans the entire
frequency range selected. With this
search option, search can take a long
time. This search type is recommended.
Some cable providers do not support
»Quick« scan.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet
forums.
17 Confirm the push button »Continue« with
» « (blue).
Note:
Perform Channel Type selection. Press
7
» « or » « to select whether you want to
V Λ
search for only digital channels (Digital),
only Analog channels (Analog) or both
(Digital + Analog) and press »OK« to
select and mark or unmark the »Digital«
and »Analog« items.
18 Press » « (red) to start searching.
– The »Digital or Analog Searching« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
19 Select the »Channel Editor« with »OK«.
Television / User Manual
« or
V
<
«