Beko B32L 5745 4B Bedienungsanleitung Seite 132

USB RECORDING
Programme setting for
recording
... with electronic programme guide
Electronic programme guide data can be used
for recording.
25 EPG reminder and/or recorder can be set
in total.
1 Press »GUIDE« to open the electronic
programme guide.
2 Select the preferred TV program with »
or » «.
Λ
– Information about the actual TV program
is displayed.
< >
3 Press »
« or » « to select the TV program
you want to record.
4 To add broadcasts to the timer press »OK«.
– Information for the TV program to be
recorded will be displayed.
5 Select the line »Record« with »
»OK« to confirm.
– Recording data range appears.
6 Press »OK« to confirm.
7 Press »EXIT« to end the menu.
Note:
If the data for the recording is to be
7
changed, open menu with »MENU«. Select
the menu item »Schedule List« with »
< >
» «, » « or » « and confirm with »OK«.
Λ
Press » « (green), change the data and
and save it with »
Notes:
A warning is displayed before the timer
7
recording starts and counts down for
10 seconds to allow you to switch to
the channel. At the end of 10 seconds,
the channel to be recorded appears
automatically.
If the timer recording starts during
7
playback, playback stops. If you do
not select »Yes« in the warning prompt,
recording will start automatically at the end
of the countdown.
Television / User Manual
-------------------------------------------------------------------------------------------
«
V
>
« and press
«,
V
« (blue).
Only for UPC customers Note: Parts of
7
previous or next files can be included into
the record while the programme is being
recorded resulting from possible Programme
Guide errors. In such cases, keep in mind
that the highest family protection level will
apply for the whole recording if one or
more of those programmes have any level of
family protection.
Set the lead/follow-up time
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few
minutes earlier or will end several minutes later,
you can „add" up to 60 minutes to this time
1 Open the menu with »MENU«.
2 Select the menu item »Schedule List« with
<
» «, » «, » « or »
V Λ
confirm.
3 Activade the »Padding Time« menu with
» « (blue).
4 Change the start time with »
5 Use » « to switch to the line »End« and
V
change the end time with »
6 Select push button »Save« with »
press »OK« to confirm.
7 Press »EXIT« to end the menu.
>
« and press »OK« to
< >
« or » «.
< >
« or » «.
« and
V
41 / 89 TR