Picture /Sound Settings - Beko B40L 5741 4B Handbuch

PICTURE /SOUND SETTINGS

Picture settings
1 Open the menu with »MENU«.
2 Select the menu item »PICTURE SETTINGS«
with » « or »
V
confirm.
– The »PICTURE SETTINGS« menu appears.
Basic Tuning
Picture Mode
Brightness
Contrast
Sharpness
Colour
Colour Temperature
Advanced Tuning
DNR
3 Select the line »Picture Mode«, »Brightness«,
»Contrast«, »Sharpness«, »Colour«, or
»Colour Temperature« with »
Select the value with »
»OK« to confirm.
Note:
In the »PICTURE SETTINGS« menu you can
7
also find other additional settings.
4 Select the line »DNR«, »Mpeg NR«,
»Vibrant Colour«, »Perfect Clear«, »Film
Mode«, »Gamma«, »Dynamic Contrast«,
»Dynamic Backlight« or »Backlight« with
» « or » «.
V Λ
Select the value with »
»OK« to confirm.
5 Press »MENU« to end the setting.
EN 80 / 24
« and press »OK« to
Λ
PICTURE SETTINGS
User
50
100
75
65
Medium
Medium
MENU
Back
« or »
V
< >
« or » « and press
< >
« or » « and press
-----------------------------------------------------------
Advanced picture settings
The "advanced picture settings" are in principal
digital image improvements which, however,
should be only used when necessary when
picture quality and transmission is excellent.
They may well improve the display with poor
material, but may adversely affect the display
where transmission and picture quality are
xx.xx.xxxx
excellent.
15:46
»Nois Reduction« – Reduces the visible
7
snow by displaying the picture a little less
sharply and creating a slight blurring.
Should therefore be used minimally with
good picture material.
»Block Noise Reduction« – This function
7
can only be selected with digital reception
sources and AV presets. It reduces any in-
terference from artefacts (pixel blocks) from
digital programmes due to MPEG compres-
sion (such as from DVB-T receivers and
lower transmission rates or DVD players).
»Vibrant Colour« – Increases the colour
7
contrast and the contrast adjustment. This
setting is mostly too strong for use with nor-
mal pictures and should only be used where
necessary (low or off) otherwise nuances in
the image can be suppressed.
»Perfect Clear« – Improves the general im-
7
«.
age by means of a gentle blue hue (giving
Λ
the appearance of greater sharpness) and
improves the black level by setting this en-
tirely to black from specific shade of back.
This reduces the visible grey values in the
dark areas of the picture.
»Film mode« detects and processes feature
7
films automatically for all channel sources.
This means you will always receive an
optimal picture.
This functions in the modi 480i, 576i and
1080i in TV playback and for other chan-
nel sources.
If the »Film mode« is switched on for
programmes without a feature film signal,
minor problems such as picture freeze,
defective subtitles or fine lines in the picture
could occur.
Television / User Manual