Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION USING EXTERNAL DEVICES
Device operation
You can decide whether external devices should
react to your television's remote control.
1 Press »
«, use »
select the preset »HDMI1« or »HDMI2« and
press »OK« to confirm.
2 Open the menu with »MENU«.
3 Select the menu item »SOURCE SETUP«
with »
« or »
V
confirm.
– The »SOURCE SETUP« menu appears.
Source
DIGILINK
Device Selection
Remote Control
Device Standby
4 Select the line »Remote Control« with »
or »
«.
Λ
5 Select the type of operation (»RC
Passthrough«, »Deck« or »Tuner« with »
>
or »
«.
EN 80 / 56
<
«, »
«, »
« or »
V
Λ
« and press »OK« to
Λ
SOURCE SETUP
HDMI1
RC Passthrough
Exit
Back
Notes:
»RC Passthrough« can be used for all
7
devices.
>
»Deck« and »Tuner« can be selected in
« to
accordance with the external device which
has been connected.
Try out which type of remote control
7
operation the external device reacts to the
best.
Read about the scope of functions of
7
the DIGILINK-compatible device in the
respective operating manual.
6 Press »BACK < « to go back one menu
xx.xx.xxxx
15:46
level or press »MENU« to end the setting.
Switching the device to standby
This option switches the external device to
standby.
1 Press »
select the preset »HDMI1« or »HDMI2« and
press »OK« to confirm.
2 Open the menu with »MENU«.
3 Select the menu item »SOURCE SETUP«
with »
V
confirm.
– The »SOURCE SETUP« menu appears.
4 Select »Device Standby« with »
and press »OK« to confirm.
– The external device switches itself off.
«
V
<
«
------------------------
<
«, use »
«, »
«, »
V
Λ
« or »
« and press »OK« to
Λ
Television / User Manual
>
« or »
« to
« or »
«
V
Λ
Werbung
Inhaltsverzeichnis
