EN
TECHNICAL DATA
Rated voltage
Brush diameter
Telescopic handle
Weight
Sound pressure level, LpA 67.5 dB(A), K = 3 dB
Sound power level, LwA
Vibration level
Always wear ear protection.
Declared total vibration values are measured in
accordance with a standard test method, and
can be used for comparisons between tools.
The value may also be used for a preliminary
assessment of exposure.
WARNING!
Vibration levels can deviate from the declared
value, depending on how the tool is used.
Suitable precautions for users must be based
on the actual conditions, taking into account
all parts of the operating cycle, such as the
time when the tool is switched off and the
idling time, in addition to the time when the
power switch is pressed.
DESCRIPTION
1.
Start inhibitor
2.
Power switch
3.
Battery holder
4.
Guard
5.
Brush
6.
Adjusting the angle
7.
Locking screw, telescopic adjustment
24
Recycle discarded product
in accordance with local
regulations.
Ø 115 mm
37–64 cm
78.2 dB(A), K = 3 dB
0.696 m/s², K = 1.5 m/s²
8.
Angular adjustment , front handle
9.
Front handle
FIG. 1
ASSEMBLY
Fit the guard
18 VDC
Fasten the guard on the brush head with three
screws.
FIG. 2
1.75 kg
Fit the brush
1.
Press in the spindle lock.
FIG. 3
2.
Put the brush on the axle.
3.
Fasten the brush with the wing nut.
4.
Release the spindle lock.
USE
Intended use
This power tool is intended for removing weeds
from between border stones and paving. It is
not intended for bricked surfaces. Only use the
power tool for its intended purpose. All other use
is considered inappropriate and will invalidate
the warranty.
Adjust the angle of the brush head
1.
Hold the power tool in a firm grip.
2.
Press the lock button to adjust the angle of
the brush head.
FIG. 4
3.
Adjust the angle of the brush head to the
required position. The brush head can be
set in five different positions (-36°, -18°,
0°, 18° and 36°).
4.
Release the lock button and check that the
brush head is properly locked.