•
Keep the charger clean. This will reduce the
risk of electric shock.
•
Always check the charger, power cord and
plug before use. Never use defective power
tools. Avoid opening or repairing the
charger. This work must be carried out by a
qualified person who uses original parts.
This will reduce the risk of electric shock.
•
Never use the charger near flammable
materials (paper, textiles, etc.). This reduces
the risk of fire.
•
Never open the power tool. This will reduce
the risk of electric shock.
•
Protect the battery from heat, direct
sunlight and naked flames. This will reduce
the risk of an explosion.
•
Incorrect use of the battery and charger can
result in the emission of vapour. This
vapour can be harmful to health.
•
Never short circuit the power tool. This will
reduce the risk of an explosion.
•
Damage or incorrect use can result in the
emission of vapour from the power tool.
If this is the case, consult a doctor to
check your respiratory tracts.
Service
•
The power tool must only be serviced by
qualified service personnel using identical
spare parts. This ensures that the power
tool remains safe to use.
Brushes
•
Do not fit brushes on machines that run
faster than the maximum brush speed.
•
Do not use damaged brushes.
•
Discolouring as a result of rust, or other
signs of chemical or mechanical
modification of the brush material, can
cause the brush to wear out in advance.
•
Store brushes in a suitable place, protected
from the following:
–
High relative humidity, heat, water
and other liquids that can damage the
brush.
–
Acid or vapour from acid the can cause
damage.
–
Low temperatures that can result in
condensation on the brush.
–
Deformation of part of the brush.
WARNING!
•
The brush continues to rotate after the
motor has stopped.
•
Do not attempt to stop the brush with
your hands. Always allow the brush to
stop by itself.
SYMBOLS
WARNING:
Read the instructions.
Wear safety glasses.
Wear ear protection.
Keep at a safe distance.
Watch out for flying objects.
Do not expose to rain.
Approved as per
applicable directives.
EN
23